Aftercare
How to adjust a sliding wardrobe door up or down
Does your sliding wardrobe not close flush with the frame,
get stuck on carpet or not reach the soft close mechanism?
This useful video shows you how simple it is to adjust the height of your sliding doors which will fix these issues. It won’t take long, and all you need is a 4mm Alan key and a screwdriver.
How to adjust the height of sliding doors…
Time to adjust: under 5 minutes / Tools needed: screwdriver & Alan key
For aluminium framed sliding doors
Locate the mechanism - the wheel mechanisms are hidden within the door trim. There are 2 cover caps on the bottom of the doors (right and left not front and back) remove the lower one to reveal the adjusting bolt.
Make the adjustments - with an Allan key turn anti-clockwise/clockwise to lower/higher the door.
The doors can be adjusted up and down by approximately 10mm.
Please note - It is more than likely that you will have to adjust both sets of wheel mechanisms
For steel framed sliding doors
Locate the mechanism - the wheel mechanisms is attached to the back of the doors. The adjusting bolt is clearly visible on the top
Make the adjustments - using a cross head Philips screwdriver and turn clockwise to lower the door / anti clockwise to raise the door.
The doors can be adjusted up and down by approximately 25mm
Please note - It is more than likely that you will have to adjust both sets of wheel mechanisms